Argyle Plumbing Glass Navbar

7 Warning Signs Your Water Heater Is About to Fail (An Argyle Plumber Explains)

Water heaters rarely fail without warning. The problem is most homeowners don’t know what to look for — until they’re taking a cold shower or mopping up a puddle in their utility room. After years of replacing water heaters throughout Argyle, Denton County, and North Texas, our plumbers have seen every mode of failure. Here are the seven warning signs you should never ignore.

Sign #1: Age — It’s Older Than 10 Years

The average traditional tank water heater lasts 8–12 years. If yours is approaching or past that mark, it’s living on borrowed time — even if it seems to be working fine. Older units become increasingly inefficient and are prone to sudden failure.

Where to check: Look for a sticker on the unit with the manufacture date, or decode the serial number. The first two digits of most serial numbers represent the year of manufacture (e.g., “17” = 2017).

Not sure whether to repair or replace? Check out our full pricing guide: how much does water heater replacement cost in Argyle TX.

Sign #2: Rusty Water or Rusty Tank

If your hot water is coming out with a reddish-brown tint, that’s rust — and it’s almost certainly coming from inside your water heater tank. Rust signals that the tank’s interior lining has broken down and corrosion has set in. This is not repairable. A rusting tank will eventually leak or burst.

Note: Rusty water in cold water lines suggests a different issue — possibly corroding supply pipes. Either way, call a plumber.

Sign #3: Popping, Rumbling, or Banging Sounds

If your water heater sounds like a popcorn machine, you have a sediment problem. Over time, minerals from hard water settle at the bottom of the tank and harden into a thick layer. As the heating element works through this layer, you hear popping and rumbling sounds.

North Texas hard water accelerates this process dramatically. Learn more about hard water damage to pipes and appliances in Texas.

Sediment buildup forces your water heater to work harder, uses more energy, and causes the tank bottom to overheat and develop small cracks. Flushing the tank annually can slow this process — see our guide on

whether you should flush your water heater every year.

Sign #4: Water Pooling Around the Base

Any water around the base of your water heater is a red flag. While it could be condensation in some cases, pooling water typically means the tank has a small fracture or a fitting has failed. As metal heats and expands repeatedly, small cracks can develop that grow larger over time.

If you see water: Turn off the cold water supply valve to the heater, turn the unit to “pilot” or off, and call us right away. A leaking water heater can cause significant property damage.

Sign #5: Inconsistent Hot Water or Running Out Quickly

When a water heater starts failing, it loses its ability to heat water efficiently. If you notice that hot water runs out faster than it used to, or the temperature fluctuates between warm and cold mid-shower, the heating element (electric) or burner (gas) may be on its way out — or sediment buildup has drastically reduced the effective tank capacity.

Sign #6: Higher Energy Bills

A declining water heater must work harder and longer to heat the same amount of water. This extra effort shows up in your gas or electric bill. If your energy costs have risen without explanation, your water heater’s inefficiency could be a contributing factor.

Sign #7: Visible Corrosion on the Tank or Connections

Inspect your water heater periodically. Look at the tank body, inlet and outlet connections, and the pressure relief valve. Orange or brown staining, flaking metal, or mineral crust around fittings are all signs of corrosion that signal the unit’s end of life is approaching.

What to Do If You Spot These Signs

Don’t wait for your water heater to fail catastrophically. Contact Argyle Plumbing to assess whether a repair or replacement is the right call. We offer transparent pricing on all water heater services in Argyle TX and can often replace a failing unit the same day.

If you’re weighing your upgrade options, our comparison of tankless vs. traditional water heaters for Argyle homeowners can help you decide.

Ready to Fix the Problem? Call Argyle Plumbing Today

Don’t wait until a minor issue turns into a major repair. Argyle Plumbing serves Argyle, Denton County, and surrounding North Texas communities with fast, professional plumbing services.

Call us now: (972) 885-8636 | Visit: argyleplumbingcom.com

Schedule Your Free Estimate — We’ll call you back within 60 minutes.

Leave a Reply

Your email address will not be published. Required fields are marked *